3 Views 0 Comments 0 Shares

Top 10 Deepest Ocean Trenches

Listen to this article Free TTS Play using your browser's built-in text-to-speech

Spread Your Love for Finepedia

Featured image for Top 10 Deepest Ocean Trenches

The ten deepest ocean trenches are ranked here by maximum confirmed depth, from the Mariana Trench’s Challenger Deep to the South Sandwich Trench. Depth, not length or width, is the ranking statistic, and the figures are the deepest published soundings compiled for each trench as of 2026, not an average along the whole axis [1][2][3].

A trench is a long, narrow depression where one tectonic plate bends beneath another. The floor of the deepest of these features sits in the hadal zone, more than 6,000 metres down, far below the average ocean depth of about 3,682 metres that NOAA cites for the world ocean as a whole [2][3]. Soundings have improved since HMS Challenger first measured the Mariana Trench in 1875, but even modern pressure sensors, sonar and submersible dives still differ by tens of metres, so a published “maximum” should be read as the best current figure for a named deep, not as a millimetre-perfect constant [2][3]. This list therefore uses a single compiled depth for each trench, notes where a second official figure exists, and ranks Japan’s trench by its deeper tabulated value even though some summary tables place it lower [1].

Eight of the ten are in the Pacific, which is where most of the world’s active subduction zones run. The Atlantic appears only at ranks 9 and 10, with the Puerto Rico and South Sandwich trenches. The Indian Ocean’s Sunda Trench is deep, but it falls short of this ten on the figures used here [1].

Key Facts

Ranks are by maximum depth in metres. A few metres of disagreement between expeditions is normal. Hadal means deeper than 6,000 metres. Length of a trench is not used to rank it.

Deepest Ocean Trenches at a Glance

RankTrenchOceanDeepest named pointMaximum depth (m)Maximum depth (ft)
1Mariana TrenchPacificChallenger Deep10,935 (NOAA, approx.)35,876
2Tonga TrenchPacificHorizon Deep10,82035,500
3Philippine TrenchPacificEmden Deep10,54034,580
4Kermadec TrenchPacific(axis deep)10,04732,963
5Izu–Bonin TrenchPacific(axis deep)9,81032,190
6Kuril–Kamchatka TrenchPacific(axis deep)9,60431,509
7New Britain TrenchPacific (Solomon Sea)Planet Deep9,14029,990
8Japan TrenchPacific(axis deep)8,41227,498
9Puerto Rico TrenchAtlanticMilwaukee Deep8,37627,480
10South Sandwich TrenchAtlanticMeteor Deep8,26627,119

1. Mariana Trench

The Mariana Trench, in the western Pacific east of the Mariana Islands and southwest of Guam, is the deepest place in the world ocean. NOAA describes its southern floor, Challenger Deep, as approximately 10,935 metres, or 35,876 feet, citing a 2021 deep-sea research paper, and notes that the average ocean is only about 3,682 metres deep [2][3]. Compiled trench tables sometimes list 10,925 metres for the same deep. The difference is small beside a nearly eleven-kilometre water column, but it is why this article treats the NOAA figure as the headline depth and the table figure as a close companion value [1][2].

The trench is the surface expression of the Pacific Plate descending beneath the Mariana Plate. It is several hundred kilometres long, yet the record depth is confined to a small, well-surveyed pocket. The name Challenger Deep commemorates the 1875 sounding by HMS Challenger, which first showed that this corner of the Pacific was extraordinary, even though later instruments have revised the exact number [2].

No other trench on this list is close once the first two Pacific hadal systems are set aside, and even the Tonga Trench, in second place, remains more than a hundred metres shallower on the compiled figures [1][2]. For the question “what is the deepest point in the ocean?”, Challenger Deep is the answer that official summaries still give in 2026 [2][3].

2. Tonga Trench

The Tonga Trench, in the South Pacific, has its record at Horizon Deep, compiled at 10,820 metres, or about 35,500 feet [1][4]. That is second only to Challenger Deep, and it is one of the few places on Earth besides the Mariana system that is confidently placed below 10,800 metres [1][4].

The trench is part of the Tonga–Kermadec subduction system, where the Pacific Plate sinks westward beneath the Tonga Plate and the Australian Plate’s northern edge. The Tonga Trench itself lies north of the Kermadec Trench, which appears fourth on this list, and the two form a nearly continuous hadal corridor northeast of New Zealand [1][4]. Horizon Deep is the named low point on the Tonga axis.

Because the two depths are so close, a new survey could narrow or widen the gap, but it would take a large revision to threaten first place. On the figures used here, Tonga is clearly second and clearly ahead of the Philippine Trench [1][4].

3. Philippine Trench

The Philippine Trench, east of the Philippine archipelago, reaches 10,540 metres, about 34,580 feet, at Emden Deep [1]. That is more than 250 metres shallower than Horizon Deep, so third place is not a close call on the compiled list, but it is still one of only four trenches in this ten that break the 10,000-metre mark [1].

The trench marks where the Philippine Sea Plate, or a related slab, descends along the eastern side of the islands. It is a separate feature from the shallower Manila Trench on the western side of Luzon, and it should not be confused with the Mariana Trench farther east, even though both are western Pacific hadal systems [1].

Emden Deep takes its name from early twentieth-century soundings. Later mapping has kept the Philippine Trench in the top three, behind only the Mariana and Tonga systems, which is the rank assigned here [1].

Sponsored

4. Kermadec Trench

The Kermadec Trench, northeast of New Zealand, is compiled at 10,047 metres, or 32,963 feet [1]. It is the fourth and last trench on this list whose maximum is still above 10,000 metres. A slightly shallower published value would drop it into the nines, which is why the figure is worth stating with its source table rather than rounding to “about ten kilometres” [1].

Geologically it is the southern partner of the Tonga Trench, along the same Pacific Plate subduction zone. The Kermadec Islands and the volcanic arc to the west sit on the overriding plate. The trench itself is a hadal trough in the open South Pacific, far from large continents [1].

Fourth place is therefore a South Pacific result, not a North Pacific one. Together, Tonga and Kermadec show how much of the world’s greatest depth is concentrated along this one plate boundary [1][4].

5. Izu–Bonin Trench

The Izu–Bonin Trench, also called the Izu–Ogasawara Trench, runs south of Japan toward the Bonin, or Ogasawara, Islands. Its compiled maximum is 9,810 metres, about 32,190 feet [1]. That puts it fifth, below the 10,000-metre group and above the Kuril–Kamchatka Trench.

The trench is the southern continuation of the Japan Trench system in a broad sense: the Pacific Plate is again the descending plate, and a volcanic island arc sits on the overriding side. It is a different axis from the Japan Trench proper, which is shorter and, on these figures, shallower, and the two should not be merged into a single rank [1].

Fifth place is a reminder that several western Pacific trenches cluster in the 9,000- to 10,000-metre range. The gaps between ranks 5, 6 and 7 are larger than the gap between some Atlantic trenches lower down, but they are still small compared with the drop from first to fifth [1].

6. Kuril–Kamchatka Trench

The Kuril–Kamchatka Trench, off the Kuril Islands and the Kamchatka Peninsula, is compiled at 9,604 metres, or 31,509 feet [1]. It is sixth, about 200 metres shallower than the Izu–Bonin maximum.

This is the great northwest Pacific subduction zone, where the Pacific Plate descends beneath the Okhotsk Plate. The volcanic Kuril arc and Kamchatka’s volcanoes sit on the overriding side. The trench itself is a long hadal trough facing the open Pacific, and it has been the source region for large megathrust earthquakes, which is a separate fact from the depth rank but helps explain why the feature is so carefully mapped [1].

On depth alone, it does not threaten the Philippine or Kermadec figures. It does, however, outrank every Atlantic trench, and it is the deepest trench that bounds the Russian Far East [1].

7. New Britain Trench

The New Britain Trench, in the Solomon Sea south of New Britain, reaches 9,140 metres, about 29,990 feet, at Planet Deep [1]. It is seventh, and it is the only entry in the ten that lies in a marginal sea rather than in the open Pacific or Atlantic.

The Solomon Sea is a relatively small basin northeast of Australia and south of the Bismarck Archipelago, but it is tectonically busy. The New Britain Trench is the hadal expression of that setting. Planet Deep is the named low point. Because the trench is less famous than the Mariana or Japan systems, its depth is easy to underestimate; the compiled figure still places it ahead of the Japan Trench [1].

Seventh is therefore a Solomon Sea result, not a “lesser Japanese trench” result. Anyone ranking only household names would skip it, which is why a depth-only list is the fairer method [1].

8. Japan Trench

The Japan Trench, east of Honshu, is compiled at 8,412 metres, or 27,498 feet [1]. That is deeper than the Puerto Rico Trench’s 8,376 metres, so this article ranks it eighth, even though some unordered summary tables list the Atlantic trench first among the eights [1].

The trench is where the Pacific Plate subducts beneath northern Honshu. It is one of the most studied subduction zones on Earth because of the population and infrastructure on the overriding plate, and because of the 2011 Tohoku-oki earthquake, which ruptured along this margin. Those events are not depth records, but they are why the axis has been surveyed in unusual detail [1].

Eighth place is close to ninth. A revision of either sounding could swap Japan and Puerto Rico. On the figures in the compiled table, Japan stays ahead, and that is the order used here [1].

9. Puerto Rico Trench

The Puerto Rico Trench, north of Puerto Rico and the Virgin Islands, is the deepest point in the Atlantic Ocean. Milwaukee Deep is compiled at 8,376 metres, or 27,480 feet [1][5]. That is only 36 metres shallower than the Japan Trench maximum, but it is still clearly shallower than every Pacific trench from ranks 1 to 7 [1][5].

The trench lies where the North American and Caribbean plates meet. It is an unusual Atlantic feature because most of the Atlantic is a spreading ocean, not a subduction ocean. The Puerto Rico Trench is the main exception in the north, and it is the reason the Atlantic appears on a global deepest-trench list at all [5].

For anyone asking about the deepest point in the Atlantic rather than in the world ocean, Milwaukee Deep is the standard answer. On a global depth list, it is ninth [1][5].

10. South Sandwich Trench

The South Sandwich Trench, in the far South Atlantic east of the South Sandwich Islands, reaches 8,266 metres, about 27,119 feet, at Meteor Deep [1]. A southern segment is sometimes listed separately with a shallower “Factorian Deep” figure; this rank uses the deeper Atlantic sounding for the trench as a whole [1].

The trench marks where the South American Plate, or associated lithosphere, descends beneath the South Sandwich microplate. It is remote, windy and ice-prone, and it is much less visited than the Caribbean or Japanese trenches, but the compiled depth still places it tenth, ahead of the Peru–Chile, or Atacama, Trench, whose Richards Deep is listed at 8,055 metres [1].

Tenth place is therefore an Atlantic, not a Pacific, finish. The Peru–Chile Trench is longer and more famous as the wall off western South America, but it is not deeper than Meteor Deep on these figures, so it stays just outside the ten [1].

Conclusion

The ten deepest ocean trenches, ranked by maximum compiled depth as of 2026, are the Mariana, Tonga, Philippine, Kermadec, Izu–Bonin, Kuril–Kamchatka, New Britain, Japan, Puerto Rico and South Sandwich trenches [1][2]. The first seven are Pacific features, and the first four are the only ones whose published maxima exceed 10,000 metres. NOAA’s figure of about 10,935 metres for Challenger Deep is the official-style answer to how deep the ocean gets; the rest of the list is a comparison of other named trenches against that benchmark, using a compiled table whose values can move by tens of metres as new soundings appear [1][2][3].

A length ranking would look different, and so would a list of the most studied or most dangerous subduction zones. Japan’s trench would rise on those other measures. On depth alone, the western and southwestern Pacific dominate, the Atlantic enters only at the end, and the Indian Ocean’s Sunda Trench, like the Peru–Chile Trench, remains just out of the ten [1]. Anyone comparing older textbook numbers with a 2026 table should expect small changes in the last metres, not a reshuffling of the first two places.

What surprised you most? Tell us in the comments.

Discussion 0

0 / 5000
Comment as a guest
Log in with
  • No comments yet. Be the first to join the discussion.